HCPL-788J-000E Broadcom, Isolation Amplifier, 16-Pin SOIC
技術文件
規格
Brand
BroadcomPower Supply Type
Dual
Typical Dual Supply Voltage
5V
Isolation Mode Rejection
140dB
Number of Channels per Chip
1
Mounting Type
Surface Mount
Package Type
SOIC
Pin Count
16
Dimensions
3.51 x 10.31 x 7.49mm
Height
3.51mm
Width
7.49mm
Length
10.31mm
Minimum Operating Temperature
-40 °C
Maximum Operating Temperature
+85 °C
原產地
Thailand
產品詳情
Isolating Amplifiers, Avago Technologies
The range of isolation amplifier optocouplers from Avago Technologies is ideal for industrial environments where the optocoupler is used to insulate high voltages and isolate any unwanted signals. Sigma-delta modulator technology allows the current and voltage sensor families to provide precise measurements of phase current and bus voltage in motor drives, power inverters and voltage signals in general isolation circuits. These isolation amplifiers offer high CMR (common mode rejection) performance and built-in safety insulation. They are a suitable alternative to the Hall Effect isolation amplifiers, for current and voltage sensing in power converters.
醞釀。 創造。 合作
免費加入
無隱藏費用！
- 下載並使用我們的 DesignSpark 軟體進行 PCB 和 3D 機械設計
- 查看網站內容和論壇
- 下載超過一百萬種產品的 3D 模型、原理圖和封裝
72.00 MOP
72.03 MOP Each (不含稅)
標準
1
72.00 MOP
72.03 MOP Each (不含稅)
暫時無法取得庫存資訊。
標準
1
暫時無法取得庫存資訊。
| 數量 | 單價 |
|---|---|
| 1 - 4 | 72.03 MOP |
| 5 - 9 | 71.31 MOP |
| 10 - 19 | 70.69 MOP |
| 20 - 39 | 69.97 MOP |
| 40+ | 69.15 MOP |
醞釀。 創造。 合作
免費加入
無隱藏費用！
- 下載並使用我們的 DesignSpark 軟體進行 PCB 和 3D 機械設計
- 查看網站內容和論壇
- 下載超過一百萬種產品的 3D 模型、原理圖和封裝
技術文件
規格
Brand
BroadcomPower Supply Type
Dual
Typical Dual Supply Voltage
5V
Isolation Mode Rejection
140dB
Number of Channels per Chip
1
Mounting Type
Surface Mount
Package Type
SOIC
Pin Count
16
Dimensions
3.51 x 10.31 x 7.49mm
Height
3.51mm
Width
7.49mm
Length
10.31mm
Minimum Operating Temperature
-40 °C
Maximum Operating Temperature
+85 °C
原產地
Thailand
產品詳情
Isolating Amplifiers, Avago Technologies
The range of isolation amplifier optocouplers from Avago Technologies is ideal for industrial environments where the optocoupler is used to insulate high voltages and isolate any unwanted signals. Sigma-delta modulator technology allows the current and voltage sensor families to provide precise measurements of phase current and bus voltage in motor drives, power inverters and voltage signals in general isolation circuits. These isolation amplifiers offer high CMR (common mode rejection) performance and built-in safety insulation. They are a suitable alternative to the Hall Effect isolation amplifiers, for current and voltage sensing in power converters.
醞釀。 創造。 合作
免費加入
無隱藏費用！
- 下載並使用我們的 DesignSpark 軟體進行 PCB 和 3D 機械設計
- 查看網站內容和論壇
- 下載超過一百萬種產品的 3D 模型、原理圖和封裝