APEM Toggle Switch Boot Toggle Switch Boot
技術文件
規格
產品詳情
APEM Toggle Switch Sealing Boots
One of the main reasons switches fail is because they have not been sealed correctly when initially installed. Using sealing boots or hoods provides extra protection and can prolong the life of the components they are used with. Sealing boots prevent the ingress of dust, sand, and moisture from penetrating the switch and causing potential damage or failure.
APEM’s range of sealing boots/hoods are simple and for easy to use. Robustly designed the one-piece construction is made from a moulded toggle cover bonded to a built-in mounting nut. Easy to fit, APEM’s toggle switch boots are used in place of the original mounting nut. This encloses the base of the switch bushing forming a tight seal against the front of the panel face.
The APEM full-toggle (standard) range of sealing boots are made from a choice of tough materials. Either high-temperature Silicone or mechanically resistant Neoprene. Both types of sealing hoods have nickel-plated brass fixing hex nuts with a plain or knurled edge.
醞釀。 創造。 合作
免費加入
無隱藏費用！
- 下載並使用我們的 DesignSpark 軟體進行 PCB 和 3D 機械設計
- 查看網站內容和論壇
- 下載超過一百萬種產品的 3D 模型、原理圖和封裝
43.30 MOP
43.28 MOP Each (不含稅)
1
43.30 MOP
43.28 MOP Each (不含稅)
暫時無法取得庫存資訊。
1
暫時無法取得庫存資訊。
| 數量 | 單價 |
|---|---|
| 1 - 14 | 43.28 MOP |
| 15 - 49 | 40.19 MOP |
| 50 - 99 | 38.23 MOP |
| 100+ | 36.27 MOP |
醞釀。 創造。 合作
免費加入
無隱藏費用！
- 下載並使用我們的 DesignSpark 軟體進行 PCB 和 3D 機械設計
- 查看網站內容和論壇
- 下載超過一百萬種產品的 3D 模型、原理圖和封裝
技術文件
規格
產品詳情
APEM Toggle Switch Sealing Boots
One of the main reasons switches fail is because they have not been sealed correctly when initially installed. Using sealing boots or hoods provides extra protection and can prolong the life of the components they are used with. Sealing boots prevent the ingress of dust, sand, and moisture from penetrating the switch and causing potential damage or failure.
APEM’s range of sealing boots/hoods are simple and for easy to use. Robustly designed the one-piece construction is made from a moulded toggle cover bonded to a built-in mounting nut. Easy to fit, APEM’s toggle switch boots are used in place of the original mounting nut. This encloses the base of the switch bushing forming a tight seal against the front of the panel face.
The APEM full-toggle (standard) range of sealing boots are made from a choice of tough materials. Either high-temperature Silicone or mechanically resistant Neoprene. Both types of sealing hoods have nickel-plated brass fixing hex nuts with a plain or knurled edge.
醞釀。 創造。 合作
免費加入
無隱藏費用！
- 下載並使用我們的 DesignSpark 軟體進行 PCB 和 3D 機械設計
- 查看網站內容和論壇
- 下載超過一百萬種產品的 3D 模型、原理圖和封裝