ACPL-7900-000E Broadcom, Isolation Amplifier, 3 → 5.5 V, 8-Pin PDIP
技術文件
規格
Brand
BroadcomPower Supply Type
Single
Typical Single Supply Voltage
3 → 5.5 V
Number of Channels per Chip
1
Maximum Voltage Gain
8.44V/V
Mounting Type
Through Hole
Package Type
PDIP
Pin Count
8
Dimensions
9.8 x 6.35 x 3.56mm
Height
3.56mm
Width
6.35mm
Length
9.8mm
Maximum Operating Temperature
+105 °C
Minimum Operating Temperature
-40 °C
產品詳情
Isolating Amplifiers, Avago Technologies
The range of isolation amplifier optocouplers from Avago Technologies is ideal for industrial environments where the optocoupler is used to insulate high voltages and isolate any unwanted signals. Sigma-delta modulator technology allows the current and voltage sensor families to provide precise measurements of phase current and bus voltage in motor drives, power inverters and voltage signals in general isolation circuits. These isolation amplifiers offer high CMR (common mode rejection) performance and built-in safety insulation. They are a suitable alternative to the Hall Effect isolation amplifiers, for current and voltage sensing in power converters.
醞釀。 創造。 合作
免費加入
無隱藏費用！
- 下載並使用我們的 DesignSpark 軟體進行 PCB 和 3D 機械設計
- 查看網站內容和論壇
- 下載超過一百萬種產品的 3D 模型、原理圖和封裝
48.80 MOP
48.85 MOP Each (不含稅)
1
48.80 MOP
48.85 MOP Each (不含稅)
暫時無法取得庫存資訊。
1
暫時無法取得庫存資訊。
| 數量 | 單價 |
|---|---|
| 1 - 4 | 48.85 MOP |
| 5 - 9 | 48.02 MOP |
| 10 - 19 | 46.78 MOP |
| 20 - 39 | 45.65 MOP |
| 40+ | 44.52 MOP |
醞釀。 創造。 合作
免費加入
無隱藏費用！
- 下載並使用我們的 DesignSpark 軟體進行 PCB 和 3D 機械設計
- 查看網站內容和論壇
- 下載超過一百萬種產品的 3D 模型、原理圖和封裝
技術文件
規格
Brand
BroadcomPower Supply Type
Single
Typical Single Supply Voltage
3 → 5.5 V
Number of Channels per Chip
1
Maximum Voltage Gain
8.44V/V
Mounting Type
Through Hole
Package Type
PDIP
Pin Count
8
Dimensions
9.8 x 6.35 x 3.56mm
Height
3.56mm
Width
6.35mm
Length
9.8mm
Maximum Operating Temperature
+105 °C
Minimum Operating Temperature
-40 °C
產品詳情
Isolating Amplifiers, Avago Technologies
The range of isolation amplifier optocouplers from Avago Technologies is ideal for industrial environments where the optocoupler is used to insulate high voltages and isolate any unwanted signals. Sigma-delta modulator technology allows the current and voltage sensor families to provide precise measurements of phase current and bus voltage in motor drives, power inverters and voltage signals in general isolation circuits. These isolation amplifiers offer high CMR (common mode rejection) performance and built-in safety insulation. They are a suitable alternative to the Hall Effect isolation amplifiers, for current and voltage sensing in power converters.
醞釀。 創造。 合作
免費加入
無隱藏費用！
- 下載並使用我們的 DesignSpark 軟體進行 PCB 和 3D 機械設計
- 查看網站內容和論壇
- 下載超過一百萬種產品的 3D 模型、原理圖和封裝