HCPL-7800A-300E Broadcom, Isolation Amplifier, 5 V, 8-Pin PDIP SMD
技術文件
規格
Brand
BroadcomPower Supply Type
Single
Typical Single Supply Voltage
5 V
Isolation Mode Rejection
76dB
Number of Channels per Chip
1
Maximum Voltage Gain
18.14dB
Mounting Type
Surface Mount
Package Type
PDIP SMD
Pin Count
8
Dimensions
3.56 x 9.8 x 6.35mm
Height
3.56mm
Width
6.35mm
Length
9.8mm
Minimum Operating Temperature
-40 °C
Maximum Operating Temperature
+85 °C
原產地
Thailand
產品詳情
Isolating Amplifiers, Avago Technologies
The range of isolation amplifier optocouplers from Avago Technologies is ideal for industrial environments where the optocoupler is used to insulate high voltages and isolate any unwanted signals. Sigma-delta modulator technology allows the current and voltage sensor families to provide precise measurements of phase current and bus voltage in motor drives, power inverters and voltage signals in general isolation circuits. These isolation amplifiers offer high CMR (common mode rejection) performance and built-in safety insulation. They are a suitable alternative to the Hall Effect isolation amplifiers, for current and voltage sensing in power converters.
醞釀。 創造。 合作
免費加入
無隱藏費用！
- 下載並使用我們的 DesignSpark 軟體進行 PCB 和 3D 機械設計
- 查看網站內容和論壇
- 下載超過一百萬種產品的 3D 模型、原理圖和封裝
100.10 MOP
100.06 MOP Each (不含稅)
標準
1
100.10 MOP
100.06 MOP Each (不含稅)
暫時無法取得庫存資訊。
標準
1
暫時無法取得庫存資訊。
| 數量 | 單價 |
|---|---|
| 1 - 4 | 100.06 MOP |
| 5 - 24 | 97.79 MOP |
| 25+ | 80.48 MOP |
醞釀。 創造。 合作
免費加入
無隱藏費用！
- 下載並使用我們的 DesignSpark 軟體進行 PCB 和 3D 機械設計
- 查看網站內容和論壇
- 下載超過一百萬種產品的 3D 模型、原理圖和封裝
技術文件
規格
Brand
BroadcomPower Supply Type
Single
Typical Single Supply Voltage
5 V
Isolation Mode Rejection
76dB
Number of Channels per Chip
1
Maximum Voltage Gain
18.14dB
Mounting Type
Surface Mount
Package Type
PDIP SMD
Pin Count
8
Dimensions
3.56 x 9.8 x 6.35mm
Height
3.56mm
Width
6.35mm
Length
9.8mm
Minimum Operating Temperature
-40 °C
Maximum Operating Temperature
+85 °C
原產地
Thailand
產品詳情
Isolating Amplifiers, Avago Technologies
The range of isolation amplifier optocouplers from Avago Technologies is ideal for industrial environments where the optocoupler is used to insulate high voltages and isolate any unwanted signals. Sigma-delta modulator technology allows the current and voltage sensor families to provide precise measurements of phase current and bus voltage in motor drives, power inverters and voltage signals in general isolation circuits. These isolation amplifiers offer high CMR (common mode rejection) performance and built-in safety insulation. They are a suitable alternative to the Hall Effect isolation amplifiers, for current and voltage sensing in power converters.
醞釀。 創造。 合作
免費加入
無隱藏費用！
- 下載並使用我們的 DesignSpark 軟體進行 PCB 和 3D 機械設計
- 查看網站內容和論壇
- 下載超過一百萬種產品的 3D 模型、原理圖和封裝