Microchip HV9120P-G, PWM Controller, 13.5 V, 3 MHz 16-Pin, PDIP
技術文件
規格
Brand
MicrochipMaximum Switching Frequency
3 MHz
Output Voltage
4.16 V
Output Current
10 mA
Number of Outputs
1
Control Method
Current, Voltage
Fall Time
75ns
Mounting Type
Through Hole
Rise Time
75ns
Package Type
PDIP
Pin Count
16
Maximum Duty Cycle
49.6%
Dimensions
0.81 x 0.28 x 0.195in
Length
20.57mm
PWM Controller Type
Current Mode
Width
0.28in
Height
4.95mm
Maximum Operating Supply Voltage
13.5 V
Minimum Operating Temperature
-55 °C
Minimum Operating Supply Voltage
9 V
Maximum Operating Temperature
+125 °C
產品詳情
HV912x Series High-Voltage Current-Mode PWM Controllers
The Microchip HV912x range of high-voltage current-mode PWM controllers are Switch Mode Power Supply (SMPS) controller subsystems that can start and run directly from almost any DC input such as 12V batteries and a rectified and filtered 240VAC line.
These devices can self-start directly from a high voltage input and subsequently take the power to operate from one of the outputs of the converter it is controlling, allowing very efficient operation while maintaining input-to-output galvanic isolation limited in voltage only by the insulation system of the associated magnetic assembly. A ±2% internal bandgap reference, internal operational amplifier, very high speed comparator, and output buffer allow production of rugged, high performance, high efficiency power supplies of 50W or more, which can still be over 80% efficient at outputs of 1.0W or less. Remote on/off controls allow either latching or nonlatching remote shutdown. During shutdown, the power required is under 6.0mW.
PWM (Pulse Width Modulation) Controllers, Microchip
醞釀。 創造。 合作
免費加入
無隱藏費用！
- 下載並使用我們的 DesignSpark 軟體進行 PCB 和 3D 機械設計
- 查看網站內容和論壇
- 下載超過一百萬種產品的 3D 模型、原理圖和封裝
18,615.50 MOP
Each (In a Tube of 24) (不含稅)
24
18,615.50 MOP
Each (In a Tube of 24) (不含稅)
暫時無法取得庫存資訊。
24
暫時無法取得庫存資訊。
醞釀。 創造。 合作
免費加入
無隱藏費用！
- 下載並使用我們的 DesignSpark 軟體進行 PCB 和 3D 機械設計
- 查看網站內容和論壇
- 下載超過一百萬種產品的 3D 模型、原理圖和封裝
技術文件
規格
Brand
MicrochipMaximum Switching Frequency
3 MHz
Output Voltage
4.16 V
Output Current
10 mA
Number of Outputs
1
Control Method
Current, Voltage
Fall Time
75ns
Mounting Type
Through Hole
Rise Time
75ns
Package Type
PDIP
Pin Count
16
Maximum Duty Cycle
49.6%
Dimensions
0.81 x 0.28 x 0.195in
Length
20.57mm
PWM Controller Type
Current Mode
Width
0.28in
Height
4.95mm
Maximum Operating Supply Voltage
13.5 V
Minimum Operating Temperature
-55 °C
Minimum Operating Supply Voltage
9 V
Maximum Operating Temperature
+125 °C
產品詳情
HV912x Series High-Voltage Current-Mode PWM Controllers
The Microchip HV912x range of high-voltage current-mode PWM controllers are Switch Mode Power Supply (SMPS) controller subsystems that can start and run directly from almost any DC input such as 12V batteries and a rectified and filtered 240VAC line.
These devices can self-start directly from a high voltage input and subsequently take the power to operate from one of the outputs of the converter it is controlling, allowing very efficient operation while maintaining input-to-output galvanic isolation limited in voltage only by the insulation system of the associated magnetic assembly. A ±2% internal bandgap reference, internal operational amplifier, very high speed comparator, and output buffer allow production of rugged, high performance, high efficiency power supplies of 50W or more, which can still be over 80% efficient at outputs of 1.0W or less. Remote on/off controls allow either latching or nonlatching remote shutdown. During shutdown, the power required is under 6.0mW.
PWM (Pulse Width Modulation) Controllers, Microchip
醞釀。 創造。 合作
免費加入
無隱藏費用！
- 下載並使用我們的 DesignSpark 軟體進行 PCB 和 3D 機械設計
- 查看網站內容和論壇
- 下載超過一百萬種產品的 3D 模型、原理圖和封裝