TL071IP Texas Instruments, Op Amp, 3MHz, 8-Pin PDIP
技術文件
規格
Brand
Texas InstrumentsMounting Type
Through Hole
Package Type
PDIP
Power Supply Type
Dual
Number of Channels per Chip
1
Pin Count
8
Typical Gain Bandwidth Product
3MHz
Typical Dual Supply Voltage
±12 V, ±15 V, ±5 V, ±9 V
Typical Slew Rate
13V/µs
Maximum Operating Temperature
+85 °C
Minimum Operating Temperature
-40 °C
Typical Voltage Gain
106 dB
Rail to Rail
No
Height
4.57mm
Dimensions
9.81 x 6.35 x 4.57mm
Length
9.81mm
Width
6.35mm
Typical Input Voltage Noise Density
18nV/√Hz
產品詳情
JFET Input Op Amp, TL070 & TL080 Families
A range of well-established high-performance JFET input, bipolar output operational amplifiers from Texas Instruments featuring low input bias currents and high slew rates. These op amps have low noise and low distortion and are suitable for a wide variety of audio and signal processing applications. The high input impedance makes them an ideal choice where circuit loading must be minimized. Offset adjustment and external compensation options are available with the single TL071 and TL081 devices.
醞釀。 創造。 合作
免費加入
無隱藏費用！
- 下載並使用我們的 DesignSpark 軟體進行 PCB 和 3D 機械設計
- 查看網站內容和論壇
- 下載超過一百萬種產品的 3D 模型、原理圖和封裝
294.70 MOP
Each (In a Pack of 10) (不含稅)
標準
10
294.70 MOP
Each (In a Pack of 10) (不含稅)
暫時無法取得庫存資訊。
標準
10
暫時無法取得庫存資訊。
醞釀。 創造。 合作
免費加入
無隱藏費用！
- 下載並使用我們的 DesignSpark 軟體進行 PCB 和 3D 機械設計
- 查看網站內容和論壇
- 下載超過一百萬種產品的 3D 模型、原理圖和封裝
技術文件
規格
Brand
Texas InstrumentsMounting Type
Through Hole
Package Type
PDIP
Power Supply Type
Dual
Number of Channels per Chip
1
Pin Count
8
Typical Gain Bandwidth Product
3MHz
Typical Dual Supply Voltage
±12 V, ±15 V, ±5 V, ±9 V
Typical Slew Rate
13V/µs
Maximum Operating Temperature
+85 °C
Minimum Operating Temperature
-40 °C
Typical Voltage Gain
106 dB
Rail to Rail
No
Height
4.57mm
Dimensions
9.81 x 6.35 x 4.57mm
Length
9.81mm
Width
6.35mm
Typical Input Voltage Noise Density
18nV/√Hz
產品詳情
JFET Input Op Amp, TL070 & TL080 Families
A range of well-established high-performance JFET input, bipolar output operational amplifiers from Texas Instruments featuring low input bias currents and high slew rates. These op amps have low noise and low distortion and are suitable for a wide variety of audio and signal processing applications. The high input impedance makes them an ideal choice where circuit loading must be minimized. Offset adjustment and external compensation options are available with the single TL071 and TL081 devices.
醞釀。 創造。 合作
免費加入
無隱藏費用！
- 下載並使用我們的 DesignSpark 軟體進行 PCB 和 3D 機械設計
- 查看網站內容和論壇
- 下載超過一百萬種產品的 3D 模型、原理圖和封裝