Ultimaker Nozzle for use with Olsson Block, Ultimaker 2+ 0.8mm
技術文件
規格
Brand
UltimakerProduct Type
Nozzle
Nozzle Material
Brass
For Use With
Olsson Block, Ultimaker 2+
Nozzle Size
0.8mm
原產地
Netherlands
產品詳情
Ultimaker 2 Jet Nozzles
The Olsson block brass Jet nozzles have a special tip angle and shoulder width, they also have a special internal geometry with an angle less steep down to the nozzle hole. A special treatment applied inside also makes them slip more. You can print 3°C to 5°C lower because of this treatment, and is also useful for oozing and drips.
With these special nozzles, you can print faster, the plastic flows much more easier than in classic nozzles. You can also clean them efficiently with cold pulls (or atomic pulls). The geometry of the inside makes it easier to get rid of plastic so changing colours or filament type is done faster and safer.
Ultimaker Accessories
P.O.A.
1
P.O.A.
暫時無法取得庫存資訊。
1
暫時無法取得庫存資訊。
技術文件
規格
Brand
UltimakerProduct Type
Nozzle
Nozzle Material
Brass
For Use With
Olsson Block, Ultimaker 2+
Nozzle Size
0.8mm
原產地
Netherlands
產品詳情
Ultimaker 2 Jet Nozzles
The Olsson block brass Jet nozzles have a special tip angle and shoulder width, they also have a special internal geometry with an angle less steep down to the nozzle hole. A special treatment applied inside also makes them slip more. You can print 3°C to 5°C lower because of this treatment, and is also useful for oozing and drips.
With these special nozzles, you can print faster, the plastic flows much more easier than in classic nozzles. You can also clean them efficiently with cold pulls (or atomic pulls). The geometry of the inside makes it easier to get rid of plastic so changing colours or filament type is done faster and safer.