TE Connectivity Duraseal Blue Insulated Female Spade Connector, Receptacle, 6.35 x 0.8mm Tab Size, 1.5mm² to 2.5mm²
技術文件
規格
Brand
TE ConnectivityType
Receptacle
Series
Duraseal
Minimum Wire Size mm²
1.5mm²
Gender
Female
Maximum Wire Size mm²
2.5mm²
Tab Size
6.35 x 0.8mm
Insulation
Insulated
Minimum Wire Size AWG
16AWG
Maximum Wire Size AWG
14AWG
Colour
Blue
Termination Method
Crimp
Insulation Material
Nylon
原產地
Mexico
產品詳情
Receptacle
From TE Connectivity, Duraseal heat shrinkable crimp connectors. Non-coated crimp contacts for use with superseal PCB connectors are also included in this range (see stock number 680-2063.)
Approvals
UL
Duraseal Heatshrinkable
TE heat shrinkable pre-insulated nylon splices and crimp terminals provide reliable connections, especially where environmental sealing is important. Covering cable sizes from 0.5mm - 6.0mm², they are designed for use where water or condensation may be encountered, or where abrasion or mechanical abuse could be problematic. To complete a joint, the cable connector is crimped in the traditional manner, and the sleeving is then heated to shrink around the cable insulation. Special adhesive flows during the heating to seal the joint.
Approvals
UL Listed
16,910.50 MOP
Each (In a Pack of 50) (不含稅)
50
16,910.50 MOP
Each (In a Pack of 50) (不含稅)
暫時無法取得庫存資訊。
50
暫時無法取得庫存資訊。
技術文件
規格
Brand
TE ConnectivityType
Receptacle
Series
Duraseal
Minimum Wire Size mm²
1.5mm²
Gender
Female
Maximum Wire Size mm²
2.5mm²
Tab Size
6.35 x 0.8mm
Insulation
Insulated
Minimum Wire Size AWG
16AWG
Maximum Wire Size AWG
14AWG
Colour
Blue
Termination Method
Crimp
Insulation Material
Nylon
原產地
Mexico
產品詳情
Receptacle
From TE Connectivity, Duraseal heat shrinkable crimp connectors. Non-coated crimp contacts for use with superseal PCB connectors are also included in this range (see stock number 680-2063.)
Approvals
UL
Duraseal Heatshrinkable
TE heat shrinkable pre-insulated nylon splices and crimp terminals provide reliable connections, especially where environmental sealing is important. Covering cable sizes from 0.5mm - 6.0mm², they are designed for use where water or condensation may be encountered, or where abrasion or mechanical abuse could be problematic. To complete a joint, the cable connector is crimped in the traditional manner, and the sleeving is then heated to shrink around the cable insulation. Special adhesive flows during the heating to seal the joint.
Approvals
UL Listed