WAGO PLC Programming Software for Use with I/O Modules

RS 庫存號: 667-9255品牌: WAGO製造商零件號: 759-302
brand-logo

技術文件

規格

Brand

Wago

Accessory Type

PLC Programming Software

For Use With

I/O Modules

原產地

Germany

產品詳情

WAGO-I/O-CHECK - Commissioning Tool For WAGO-I/O-SYSTEM 750

WAGO-I/O-CHECK is an easy-to-use Windows application for operating and displaying a WAGO-I/O-SYSTEM 750 node without connecting the node to a fieldbus system.
The software reads the configuration from the node and displays it as an on-screen graphic. The graphic can be printed together with a configuration list as documentation.
With WAGO-I/O-CHECK, it is possible to display and determine the process data of the bus modules. The field wiring, including all sensors and actuators, can thus be checked before startup.
Application-specific settings, such as the baud rate or sensor types, can be made with select interface, Pt100 and thermocouple modules. For communicating between WAGO-I/O-CHECK and the node, the coupler must be connected at a PC’s vacant serial or USB port using the communication cable supplied in the kit with the system.

Wago I/O system range

You may be interested in
WAGO PLC Programming Software for Use with Pentium
8,887.96 MOPEach (不含稅)

4,045.40 MOP

4,045.43 MOP Each (不含稅)

WAGO PLC Programming Software for Use with I/O Modules

4,045.40 MOP

4,045.43 MOP Each (不含稅)

WAGO PLC Programming Software for Use with I/O Modules

暫時無法取得庫存資訊。

暫時無法取得庫存資訊。

You may be interested in
WAGO PLC Programming Software for Use with Pentium
8,887.96 MOPEach (不含稅)

技術文件

規格

Brand

Wago

Accessory Type

PLC Programming Software

For Use With

I/O Modules

原產地

Germany

產品詳情

WAGO-I/O-CHECK - Commissioning Tool For WAGO-I/O-SYSTEM 750

WAGO-I/O-CHECK is an easy-to-use Windows application for operating and displaying a WAGO-I/O-SYSTEM 750 node without connecting the node to a fieldbus system.
The software reads the configuration from the node and displays it as an on-screen graphic. The graphic can be printed together with a configuration list as documentation.
With WAGO-I/O-CHECK, it is possible to display and determine the process data of the bus modules. The field wiring, including all sensors and actuators, can thus be checked before startup.
Application-specific settings, such as the baud rate or sensor types, can be made with select interface, Pt100 and thermocouple modules. For communicating between WAGO-I/O-CHECK and the node, the coupler must be connected at a PC’s vacant serial or USB port using the communication cable supplied in the kit with the system.

Wago I/O system range

You may be interested in
WAGO PLC Programming Software for Use with Pentium
8,887.96 MOPEach (不含稅)