技術文件
規格
Brand
AssemtechContact Configuration
SPST-NO
Product Type
Reed Switch
Maximum Switching Current
1A
Maximum Switching Power
30W
Maximum Switching Voltage
200V ac/dc
Contact Resistance
2Ω
Contact Material
Ruthenium on Gold
Maximum Release Time
30μs
Operating Time Including Bounce
0.35ms
AT Value Range
46 to 70 AT
Terminal Type
Wire
Mount Type
PCB
Minimum Operating Temperature
-55°C
Maximum Operating Temperature
125°C
Width
2.7mm
Length
20.5mm
Standards/Approvals
ISO
Series
RI
原產地
Belgium
產品詳情
These kits have been specially brought together for the design stage. Each kit has a selection of sensitivity levels from the required series allowing you to test which is best for your application. This eliminates the need to purchase packs of each sensitivity helping to reduce waste and cost.
They are hermetically sealed in a gas-filled glass envelope. Actuation is done with an electro-magnet, a permanent magnet or a combination of both. If you prefer, they can be placed alongside a coil and actuated when a current is applied to the coil. They feature single pole, single throw, normally open contacts and have two magnetically actuated reeds.
暫時無法取得庫存資訊。
43.30 MOP
43.28 MOP 1 Kit (不含稅)
1
43.30 MOP
43.28 MOP 1 Kit (不含稅)
暫時無法取得庫存資訊。
1
| 數量 | 單價 |
|---|---|
| 1 - 9 | 43.28 MOP |
| 10 - 24 | 42.15 MOP |
| 25 - 49 | 40.60 MOP |
| 50 - 199 | 39.78 MOP |
| 200+ | 39.06 MOP |
技術文件
規格
Brand
AssemtechContact Configuration
SPST-NO
Product Type
Reed Switch
Maximum Switching Current
1A
Maximum Switching Power
30W
Maximum Switching Voltage
200V ac/dc
Contact Resistance
2Ω
Contact Material
Ruthenium on Gold
Maximum Release Time
30μs
Operating Time Including Bounce
0.35ms
AT Value Range
46 to 70 AT
Terminal Type
Wire
Mount Type
PCB
Minimum Operating Temperature
-55°C
Maximum Operating Temperature
125°C
Width
2.7mm
Length
20.5mm
Standards/Approvals
ISO
Series
RI
原產地
Belgium
產品詳情
These kits have been specially brought together for the design stage. Each kit has a selection of sensitivity levels from the required series allowing you to test which is best for your application. This eliminates the need to purchase packs of each sensitivity helping to reduce waste and cost.
They are hermetically sealed in a gas-filled glass envelope. Actuation is done with an electro-magnet, a permanent magnet or a combination of both. If you prefer, they can be placed alongside a coil and actuated when a current is applied to the coil. They feature single pole, single throw, normally open contacts and have two magnetically actuated reeds.
