技術文件
規格
Brand
LittelfuseProduct Type
PCB Mount Fuse Holder Cover
Series
835
Compatible Fuse Size
5 x 20 mm
Fuse Holder Mount Type
Flush
Length
20.6mm
Height
20.5mm
Cover Material
Polyamide
Standards/Approvals
CSA, UL
IP Rating
IP64, IP40
For Use With
5 x 20 mm Fuse
產品詳情
Littelfuse fuseholders and clips offer a comprehensive solution to a variety of application requirements. Littlefuse fuse holders offer protection for electrical circuits when used in conjunction with a 6.35x32mm fuse.
CATEGORIES OF PROTECTION AGAINST ELECTRIC SHOCK,PC1: No integral protection against electric shock. If required, designers must provide additional protection against electric shock on equipment.,PC2: With integral protection against electric shock. Fuse-holders shall have live parts inaccessible to IEC529 standard test finger, when fully assembled, without fuse carrier or fuse in place and when fuse carrier, with fuse is being inserted or withdrawn.,PC3: With integral protection against electric shock. Fuse-holders shall have live parts inaccessible to IEC529 1mm diameter rigid test wire when fully assembled, without fuse carrier or fuse in place and when fuse carrier, with fuse is being inserted or withdrawn.
暫時無法取得庫存資訊。
101.30 MOP
20.26 MOP Each (In a Pack of 5) (不含稅)
5
101.30 MOP
20.26 MOP Each (In a Pack of 5) (不含稅)
暫時無法取得庫存資訊。
5
| 數量 | 單價 | 每包 |
|---|---|---|
| 5 - 245 | 20.26 MOP | 101.30 MOP |
| 250 - 745 | 19.847 MOP | 99.24 MOP |
| 750 - 2495 | 19.229 MOP | 96.15 MOP |
| 2500 - 4995 | 18.776 MOP | 93.88 MOP |
| 5000+ | 18.364 MOP | 91.82 MOP |
技術文件
規格
Brand
LittelfuseProduct Type
PCB Mount Fuse Holder Cover
Series
835
Compatible Fuse Size
5 x 20 mm
Fuse Holder Mount Type
Flush
Length
20.6mm
Height
20.5mm
Cover Material
Polyamide
Standards/Approvals
CSA, UL
IP Rating
IP64, IP40
For Use With
5 x 20 mm Fuse
產品詳情
Littelfuse fuseholders and clips offer a comprehensive solution to a variety of application requirements. Littlefuse fuse holders offer protection for electrical circuits when used in conjunction with a 6.35x32mm fuse.
CATEGORIES OF PROTECTION AGAINST ELECTRIC SHOCK,PC1: No integral protection against electric shock. If required, designers must provide additional protection against electric shock on equipment.,PC2: With integral protection against electric shock. Fuse-holders shall have live parts inaccessible to IEC529 standard test finger, when fully assembled, without fuse carrier or fuse in place and when fuse carrier, with fuse is being inserted or withdrawn.,PC3: With integral protection against electric shock. Fuse-holders shall have live parts inaccessible to IEC529 1mm diameter rigid test wire when fully assembled, without fuse carrier or fuse in place and when fuse carrier, with fuse is being inserted or withdrawn.
