技術文件
規格
Brand
LittelfuseProduct Type
Fuse Holder Accessory
Accessory Type
Holder/Cap
For Use With
For 5 x 20 mm Fuses
Standards/Approvals
IEC 60127-6No UOM, UL 512No UOM, CSA C22.2. No.39No UOM
原產地
Czech Republic
產品詳情
Littelfuse fuseholders and clips offer a comprehensive solution to a variety of application requirements. Littlefuse fuse holders offer protection for electrical circuits when used in conjunction with a 6.35x32mm fuse.
CATEGORIES OF PROTECTION AGAINST ELECTRIC SHOCK,PC1: No integral protection against electric shock. If required, designers must provide additional protection against electric shock on equipment.,PC2: With integral protection against electric shock. Fuse-holders shall have live parts inaccessible to IEC529 standard test finger, when fully assembled, without fuse carrier or fuse in place and when fuse carrier, with fuse is being inserted or withdrawn.,PC3: With integral protection against electric shock. Fuse-holders shall have live parts inaccessible to IEC529 1mm diameter rigid test wire when fully assembled, without fuse carrier or fuse in place and when fuse carrier, with fuse is being inserted or withdrawn.
暫時無法取得庫存資訊。
129.40 MOP
25.886 MOP Each (In a Pack of 5) (不含稅)
標準
5
129.40 MOP
25.886 MOP Each (In a Pack of 5) (不含稅)
暫時無法取得庫存資訊。
標準
5
| 數量 | 單價 | 每包 |
|---|---|---|
| 5 - 20 | 25.886 MOP | 129.43 MOP |
| 25 - 45 | 25.35 MOP | 126.75 MOP |
| 50 - 245 | 24.567 MOP | 122.84 MOP |
| 250 - 495 | 23.825 MOP | 119.13 MOP |
| 500+ | 23.454 MOP | 117.27 MOP |
技術文件
規格
Brand
LittelfuseProduct Type
Fuse Holder Accessory
Accessory Type
Holder/Cap
For Use With
For 5 x 20 mm Fuses
Standards/Approvals
IEC 60127-6No UOM, UL 512No UOM, CSA C22.2. No.39No UOM
原產地
Czech Republic
產品詳情
Littelfuse fuseholders and clips offer a comprehensive solution to a variety of application requirements. Littlefuse fuse holders offer protection for electrical circuits when used in conjunction with a 6.35x32mm fuse.
CATEGORIES OF PROTECTION AGAINST ELECTRIC SHOCK,PC1: No integral protection against electric shock. If required, designers must provide additional protection against electric shock on equipment.,PC2: With integral protection against electric shock. Fuse-holders shall have live parts inaccessible to IEC529 standard test finger, when fully assembled, without fuse carrier or fuse in place and when fuse carrier, with fuse is being inserted or withdrawn.,PC3: With integral protection against electric shock. Fuse-holders shall have live parts inaccessible to IEC529 1mm diameter rigid test wire when fully assembled, without fuse carrier or fuse in place and when fuse carrier, with fuse is being inserted or withdrawn.
