技術文件
規格
Brand
M5StackProduct Type
Motor & Robotic Development Tool
Power Management Function
Motor Driver
For Use With
M5StickC, M5 Core, M5StickV
Kit Classification
Motor Driver Board
Featured Device
PCS9685, SY8368AQQC
Kit Name
SERVO2 Module 16 Channels - 13.2
Standards/Approvals
No
原產地
China
產品詳情
The M5Stack SERVO 2 is an updated servo driver module in the M5Stack stackable module series. It uses a PCA9685 16 channel PWM controller to control 16 channel servos at the same time. The power input is 6-12V DC and two SY8368AQQC chips are used for voltage reduction. The maximum total power output of dual channel is 35W (5V / 3.5A * 2), and the maximum output power of single channel is 25W (5V / 5A). When the battery base is used for power supply, the maximum output power is 5V / 2A. The module communicates with the host directly through I2C (the default address is 0x40) however the I2C address can be changed(0x40 - 0x47) through the dial switch. This also means that multiple Servo 2 modules can be stacked and used simultaneously. There is a power switch on the board to control the power supply of
暫時無法取得庫存資訊。
140.90 MOP
140.87 MOP Each (不含稅)
1
140.90 MOP
140.87 MOP Each (不含稅)
暫時無法取得庫存資訊。
1
技術文件
規格
Brand
M5StackProduct Type
Motor & Robotic Development Tool
Power Management Function
Motor Driver
For Use With
M5StickC, M5 Core, M5StickV
Kit Classification
Motor Driver Board
Featured Device
PCS9685, SY8368AQQC
Kit Name
SERVO2 Module 16 Channels - 13.2
Standards/Approvals
No
原產地
China
產品詳情
The M5Stack SERVO 2 is an updated servo driver module in the M5Stack stackable module series. It uses a PCA9685 16 channel PWM controller to control 16 channel servos at the same time. The power input is 6-12V DC and two SY8368AQQC chips are used for voltage reduction. The maximum total power output of dual channel is 35W (5V / 3.5A * 2), and the maximum output power of single channel is 25W (5V / 5A). When the battery base is used for power supply, the maximum output power is 5V / 2A. The module communicates with the host directly through I2C (the default address is 0x40) however the I2C address can be changed(0x40 - 0x47) through the dial switch. This also means that multiple Servo 2 modules can be stacked and used simultaneously. There is a power switch on the board to control the power supply of
