技術文件
規格
Brand
MicrochipMaximum Data Rate
100Mbps
Product Type
Ethernet Controller
Communication Mode
Full Duplex/Half Duplex
Loopback Mode
Internal
Interface Type
Host Bus
Standard Supported
IEEE 802.3, ANSI X3.263, IEEE 802.3u
Mount Type
Surface
Package Type
TQFP
Pin Count
64
Maximum Supply Voltage
3.3V
Minimum Operating Temperature
-40°C
Maximum Operating Temperature
85°C
Minimum Supply Voltage
3.3V
Height
1.2mm
Length
10mm
Standards/Approvals
No
Width
10mm
Automotive Standard
No
產品詳情
The LAN9252 device from Microchip is a 2/3 port EtherCAT® slave controller with dual integrated Ethernet PHYs, each of which contain a full-duplex 100BASE-TX transceiver. The LAN9252 supports HP Auto MDI-X that allows the use of direct connect or cross-over LAN cables. 100BASE-FX is supported via an external fiber transceiver. Included is a 3 port EtherCAT® slave controller with 4K bytes of Dual Port memory (DPRAM), 4 SyncManagers, 3 Fieldbus Memory Management Units (FMMUs) and a 64-bit Distributed Clock. The LAN9252 supports 4 Process Data Interfaces - SPI/SQI, HBI and a 16 Bit Digital IO.
醞釀。 創造。 合作
免費加入
無隱藏費用！
暫時無法取得庫存資訊。
95.90 MOP
95.94 MOP Each (Supplied in a Tray) (不含稅)
生產包 (盤)
1
95.90 MOP
95.94 MOP Each (Supplied in a Tray) (不含稅)
暫時無法取得庫存資訊。
生產包 (盤)
1
| 數量 | 單價 |
|---|---|
| 1 - 39 | 95.94 MOP |
| 40 - 79 | 93.98 MOP |
| 80+ | 92.13 MOP |
醞釀。 創造。 合作
免費加入
無隱藏費用！
技術文件
規格
Brand
MicrochipMaximum Data Rate
100Mbps
Product Type
Ethernet Controller
Communication Mode
Full Duplex/Half Duplex
Loopback Mode
Internal
Interface Type
Host Bus
Standard Supported
IEEE 802.3, ANSI X3.263, IEEE 802.3u
Mount Type
Surface
Package Type
TQFP
Pin Count
64
Maximum Supply Voltage
3.3V
Minimum Operating Temperature
-40°C
Maximum Operating Temperature
85°C
Minimum Supply Voltage
3.3V
Height
1.2mm
Length
10mm
Standards/Approvals
No
Width
10mm
Automotive Standard
No
產品詳情
The LAN9252 device from Microchip is a 2/3 port EtherCAT® slave controller with dual integrated Ethernet PHYs, each of which contain a full-duplex 100BASE-TX transceiver. The LAN9252 supports HP Auto MDI-X that allows the use of direct connect or cross-over LAN cables. 100BASE-FX is supported via an external fiber transceiver. Included is a 3 port EtherCAT® slave controller with 4K bytes of Dual Port memory (DPRAM), 4 SyncManagers, 3 Fieldbus Memory Management Units (FMMUs) and a 64-bit Distributed Clock. The LAN9252 supports 4 Process Data Interfaces - SPI/SQI, HBI and a 16 Bit Digital IO.
醞釀。 創造。 合作
免費加入
無隱藏費用！
