技術文件
規格
Brand
OEPProduct Type
Audio Transformer
Secondary Impedance
1kΩ
Primary DC Resistance
3.2kΩ
Secondary DC Resistance
314Ω
Mount Type
Through Hole
Termination Type
PC Pin
Number of Pins
8
Minimum Operating Temperature
0°C
Maximum Operating Temperature
70°C
Depth
29.4mm
Length
25mm
Weight
56g
Standards/Approvals
No
Width
24mm
Series
A187A10C
Isolation Voltage
250Vrms
Maximum Operating Frequency
25kHz
Minimum Operating Frequency
10Hz
Turns Ratio
11.5:1+1
Construction
Mu-Metal Screening Can
原產地
United Kingdom
產品詳情
A187A10C audio input transformers from OEP have multiple electrostatic and magnetic shields and provide galvanic isolation. The A187A10C transformer is a high ratio step down transformer featuring Faraday shielding that reduces hum and stray magnetic interference.
These audio input transformers are suitable for long cable runs without HF loss. They can be used for coupling instrument pickups to low impedance microphone inputs and unbalanced line level to balanced microphone outputs.
Do not pass DC through the windings.
暫時無法取得庫存資訊。
504.50 MOP
504.53 MOP Each (不含稅)
1
504.50 MOP
504.53 MOP Each (不含稅)
暫時無法取得庫存資訊。
1
| 數量 | 單價 |
|---|---|
| 1 - 9 | 504.53 MOP |
| 10+ | 469.19 MOP |
技術文件
規格
Brand
OEPProduct Type
Audio Transformer
Secondary Impedance
1kΩ
Primary DC Resistance
3.2kΩ
Secondary DC Resistance
314Ω
Mount Type
Through Hole
Termination Type
PC Pin
Number of Pins
8
Minimum Operating Temperature
0°C
Maximum Operating Temperature
70°C
Depth
29.4mm
Length
25mm
Weight
56g
Standards/Approvals
No
Width
24mm
Series
A187A10C
Isolation Voltage
250Vrms
Maximum Operating Frequency
25kHz
Minimum Operating Frequency
10Hz
Turns Ratio
11.5:1+1
Construction
Mu-Metal Screening Can
原產地
United Kingdom
產品詳情
A187A10C audio input transformers from OEP have multiple electrostatic and magnetic shields and provide galvanic isolation. The A187A10C transformer is a high ratio step down transformer featuring Faraday shielding that reduces hum and stray magnetic interference.
These audio input transformers are suitable for long cable runs without HF loss. They can be used for coupling instrument pickups to low impedance microphone inputs and unbalanced line level to balanced microphone outputs.
Do not pass DC through the windings.