A22E Series Emergency Stop Switch
The A22E series emergency stop switch is supplied as a complete or sub-assembled unit and can be installed in a 22mm or 25mm diameter hole. The switch unit can easily be mounted without the use of tools.
- Direct opening mechanism to open the circuit when the contact welds
- Safety lock mechanism prevents operating errors
- Easy mounting and removal of Switch Blocks using a lever
- Mount three Switch Units in series to improve wiring efficiency (with non-lighted Switch Units, three Units can be mounted for multiple contacts)
- Finger protection mechanism on Switch Unit provided as a standard feature
- Install using either round, or forked crimp terminals
- Non-lighted models IP65 (oil-resistant), lighted models IP65
- A lock plate is provided as a standard feature to ensure that the control box and switch are not easily separated
Completely Assembled Models
- Non-lighted, 818-2009, 861-4616, 757-9089, 549-479, 841-1809 & 861-4610 (with Emergency Off legend)
- Lighted, without voltage reduction unit, 757-9092 & 757-9095
Switch with Integrated Control Box
- Non-lighted, 746-7154 & 746-7163
Operation Units only
- Non-lighted 746-7166 & 746-7157
- Lighted 746-7150
Switch Units only
- Without voltage reduction unit, 861-4629 & 861-4622
- With voltage reduction unit, 861-4626
Accessories
- LED lamp, Red, 24 Vac/dc, 861-4635
- Emergency Stop legend plate, 60mm dia. 757-9109
- Emergency Off legend plate, 60mm dia. 746-7160
- Control Box, yellow, 1 hole, 746-7179
- E-Stop Shroud with Emergency Off legend, yellow, 746-7172
- E-Stop Shroud, yellow, 746-7176 (no spacers) & 746-7185 (2 spacers)
Standards
UL508 C22.2 No.14, EN60947-5-1 & EN60947-5-5 (certified direct opening mechanism), GB14048.5, EN60947-5-1.
Approvals
UL, cUL, TUV, CCC.
