技術文件
規格
Brand
RS ProProduct Type
Pneumatic Fitting
Sub Type
Union Tee
Connection Size A
4 mm
Connection Type A
Push-in
Connection Size B
4 mm
Connection Type B
Push-in
Minimum Operating Temperature
0°C
Material
Polyoxymethylene
Maximum Operating Temperature
60°C
Standards/Approvals
No
Chemical Resistant
No
Maximum Operating Pressure
10 bar
Food Grade
No
Finish
Nickel
原產地
Taiwan, Province Of China
產品詳情
The RS PRO pneumatic tee tube-to-tube adapter is built for use with pneumatic piping. It's able to handle high pressure, such as in oxygen systems and gas cylinders. It has a one-touch push-to-connect design.
With a six-angle wrench, it's perfect for tight or hard-to-reach spaces. The body material is made from polyoxymethylene (POM) and has a nickel-plated finish, both of which provide long-term protection from contaminants and rust. It's ideal for use with dry air systems as it has a maximum operating pressure of 10 bar. You can use this component in a temperature range of 0°C to +60°C. To disconnect the adapter, push on the POM sleeve and pull out the tube from the fitting.
As part of the RS PRO range, it has a high build quality and delivers consistent performance. You'll find this T-shaped connection used on vacuum systems, instrumentation and other general-purpose applications.
RS PRO is our own brand range and brings you a wide range of high-quality, great value products offering you more choice. Trusted by engineers all over the world, every part of every RS PRO product has been rigorously tested against demanding industry standards; theyre only given the RS PRO Seal of Approval if were confident of their exceptional quality, which means you can be confident too.
暫時無法取得庫存資訊。
14.10 MOP
14.087 MOP 1 Pack of 10 (不含稅)
1
14.10 MOP
14.087 MOP 1 Pack of 10 (不含稅)
暫時無法取得庫存資訊。
1
| 數量 | 單價 | 每包 |
|---|---|---|
| 10 - 40 | 14.087 MOP | 140.87 MOP |
| 50+ | 11.593 MOP | 115.93 MOP |
技術文件
規格
Brand
RS ProProduct Type
Pneumatic Fitting
Sub Type
Union Tee
Connection Size A
4 mm
Connection Type A
Push-in
Connection Size B
4 mm
Connection Type B
Push-in
Minimum Operating Temperature
0°C
Material
Polyoxymethylene
Maximum Operating Temperature
60°C
Standards/Approvals
No
Chemical Resistant
No
Maximum Operating Pressure
10 bar
Food Grade
No
Finish
Nickel
原產地
Taiwan, Province Of China
產品詳情
The RS PRO pneumatic tee tube-to-tube adapter is built for use with pneumatic piping. It's able to handle high pressure, such as in oxygen systems and gas cylinders. It has a one-touch push-to-connect design.
With a six-angle wrench, it's perfect for tight or hard-to-reach spaces. The body material is made from polyoxymethylene (POM) and has a nickel-plated finish, both of which provide long-term protection from contaminants and rust. It's ideal for use with dry air systems as it has a maximum operating pressure of 10 bar. You can use this component in a temperature range of 0°C to +60°C. To disconnect the adapter, push on the POM sleeve and pull out the tube from the fitting.
As part of the RS PRO range, it has a high build quality and delivers consistent performance. You'll find this T-shaped connection used on vacuum systems, instrumentation and other general-purpose applications.
RS PRO is our own brand range and brings you a wide range of high-quality, great value products offering you more choice. Trusted by engineers all over the world, every part of every RS PRO product has been rigorously tested against demanding industry standards; theyre only given the RS PRO Seal of Approval if were confident of their exceptional quality, which means you can be confident too.
