技術文件
規格
Brand
RS ProMaximum Pressure Measurement
4bar
Product Type
Pressure Switch
Minimum Pressure Measurement
0bar
Accuracy
0.5 %
Analogue Output
4 to 20 mA
Maximum Supply Voltage
30V dc
Standards/Approvals
EAC
Housing Material
Stainless Steel
Mount Type
Flush
Maximum Operating Temperature
125°C
IP Rating
IP65
原產地
Germany
產品詳情
This RS PRO pressure switch can measure the pressure exerted by liquid and gaseous media from 0 bar to 4 bar. The sensor's case is made from 303-grade stainless steel, so it won't be corroded by contact with the gas or liquid being measured, or contaminate the medium.
It converts pressure into an analogue electrical signal of 4 mA to 20 mA, which is directly proportional to the pressure being measured. A 1/4-inch threaded connector physically connects the switch to the pressure chamber. Electrical connections are made using a two-wire output via cable gland and screw terminal or M12 connector. You can power the sensor with a DC voltage of between 10 V and 30 V.
You'll find this product can be used in temperatures from -20°C to +125°C. These characteristics make it suitable for use in a wide range of applications, including the medical, aviation, automotive, and marine fields.
RS PRO is our own brand range and brings you a wide range of high-quality, great value products offering you more choice. Trusted by engineers all over the world, every part of every RS PRO product has been rigorously tested against demanding industry standards; theyre only given the RS PRO Seal of Approval if were confident of their exceptional quality, which means you can be confident too.
暫時無法取得庫存資訊。
1,347.30 MOP
1,347.28 MOP Each (不含稅)
1
1,347.30 MOP
1,347.28 MOP Each (不含稅)
暫時無法取得庫存資訊。
1
| 數量 | 單價 |
|---|---|
| 1 - 4 | 1,347.28 MOP |
| 5 - 24 | 1,292.76 MOP |
| 25+ | 1,266.90 MOP |
技術文件
規格
Brand
RS ProMaximum Pressure Measurement
4bar
Product Type
Pressure Switch
Minimum Pressure Measurement
0bar
Accuracy
0.5 %
Analogue Output
4 to 20 mA
Maximum Supply Voltage
30V dc
Standards/Approvals
EAC
Housing Material
Stainless Steel
Mount Type
Flush
Maximum Operating Temperature
125°C
IP Rating
IP65
原產地
Germany
產品詳情
This RS PRO pressure switch can measure the pressure exerted by liquid and gaseous media from 0 bar to 4 bar. The sensor's case is made from 303-grade stainless steel, so it won't be corroded by contact with the gas or liquid being measured, or contaminate the medium.
It converts pressure into an analogue electrical signal of 4 mA to 20 mA, which is directly proportional to the pressure being measured. A 1/4-inch threaded connector physically connects the switch to the pressure chamber. Electrical connections are made using a two-wire output via cable gland and screw terminal or M12 connector. You can power the sensor with a DC voltage of between 10 V and 30 V.
You'll find this product can be used in temperatures from -20°C to +125°C. These characteristics make it suitable for use in a wide range of applications, including the medical, aviation, automotive, and marine fields.
RS PRO is our own brand range and brings you a wide range of high-quality, great value products offering you more choice. Trusted by engineers all over the world, every part of every RS PRO product has been rigorously tested against demanding industry standards; theyre only given the RS PRO Seal of Approval if were confident of their exceptional quality, which means you can be confident too.
