技術文件
規格
Brand
SickProduct Type
Photoelectric Sensor
Sensor Style
Rectangular
Detection Type
Background Suppression
Output Type
PNP
Terminal Type
3-Pin Connector
Maximum DC Voltage
30V dc
Interface Type
M8 Connector
Light Source
Pin Point LED
Minimum Operating Temperature
-25°C
IP Rating
IP67
Maximum Current
50mA
Maximum Operating Temperature
50°C
Standards/Approvals
CE Certified, UL Certified
Response Time
600μs
Hazardous Area Certification
No
Series
G2S
Housing Material
Plastic
Mount Type
Panel
Detection Range
2 mm → 120 mm
原產地
Malaysia
產品詳情
This photoelectric sensor is a Compact background-suppression proximity device designed for industrial automation tasks. It uses a visible red pin‑point LED to detect objects across a practical working span and operates from low‑voltage DC supplies, making it suitable for control and sensing installations where reliable light‑based detection and a Compact form factor are required.
It employs a pin‑point LED emitting at 640 nm with a light spot about Ø3.5mm at 50 mm, giving concentrated illumination for accurate detection.
Detection threshold is set via a three‑turn potentiometer allowing fine tuning for surfaces ranging from high to low remission.
The unit has a 3‑pin M8 connector with built‑in reverse‑polarity protection, interference suppression and output overcurrent/short‑circuit protection features.
The device operates between -25 °C and +50 °C and is rated to IP67 for protection against dust and temporary immersion.
Switching frequency reaches up to 800 Hz with a signal transit time under 0.6 MS when used with resistive loads.
Product details cover the whole product family. For details on the specifications for this individual product, please refer to the datasheet.
暫時無法取得庫存資訊。
1,347.90 MOP
1,347.86 MOP Each (不含稅)
1
1,347.90 MOP
1,347.86 MOP Each (不含稅)
暫時無法取得庫存資訊。
1
技術文件
規格
Brand
SickProduct Type
Photoelectric Sensor
Sensor Style
Rectangular
Detection Type
Background Suppression
Output Type
PNP
Terminal Type
3-Pin Connector
Maximum DC Voltage
30V dc
Interface Type
M8 Connector
Light Source
Pin Point LED
Minimum Operating Temperature
-25°C
IP Rating
IP67
Maximum Current
50mA
Maximum Operating Temperature
50°C
Standards/Approvals
CE Certified, UL Certified
Response Time
600μs
Hazardous Area Certification
No
Series
G2S
Housing Material
Plastic
Mount Type
Panel
Detection Range
2 mm → 120 mm
原產地
Malaysia
產品詳情
This photoelectric sensor is a Compact background-suppression proximity device designed for industrial automation tasks. It uses a visible red pin‑point LED to detect objects across a practical working span and operates from low‑voltage DC supplies, making it suitable for control and sensing installations where reliable light‑based detection and a Compact form factor are required.
It employs a pin‑point LED emitting at 640 nm with a light spot about Ø3.5mm at 50 mm, giving concentrated illumination for accurate detection.
Detection threshold is set via a three‑turn potentiometer allowing fine tuning for surfaces ranging from high to low remission.
The unit has a 3‑pin M8 connector with built‑in reverse‑polarity protection, interference suppression and output overcurrent/short‑circuit protection features.
The device operates between -25 °C and +50 °C and is rated to IP67 for protection against dust and temporary immersion.
Switching frequency reaches up to 800 Hz with a signal transit time under 0.6 MS when used with resistive loads.
Product details cover the whole product family. For details on the specifications for this individual product, please refer to the datasheet.
