技術文件
規格
Brand
STMicroelectronicsOutput Current
200mA
Product Type
Lighting Controller
Input Voltage
42, 4.5V
Input Voltage Type
DC
Dimming Operation
Analogue
Mount Type
Surface
Package Type
QFN
Number of Pins
24
Maximum Output Voltage
42V
Minimum Operating Temperature
-40°C
Maximum Operating Temperature
150°C
Standards/Approvals
RoHS
Width
5.1mm
Series
ALED7709ATR
Length
5.1mm
Height
0.9mm
Automotive Standard
AEC-Q100
Minimum Output Voltage
4.5V
原產地
Thailand
產品詳情
The STMicroelectronics automotive grade LED drivers combining a boost or SEPIC controller and four low-side constant current sinkers, designed to drive strings of high brightness LEDs. The switching converter section provides the supply rail for the LED strings whose value is constantly optimized for maximum efficiency. The boost or SEPIC controller supports the external synchronization and spread spectrum. It can work simultaneously or exclusively in standalone mode (SAM), controlled only by PWMI signal and in bus driven mode (BDM) through an I2C serial interface.
醞釀。 創造。 合作
免費加入
無隱藏費用！
暫時無法取得庫存資訊。
64,763.60 MOP
21.588 MOP Each (On a Reel of 3000) (不含稅)
3000
64,763.60 MOP
21.588 MOP Each (On a Reel of 3000) (不含稅)
暫時無法取得庫存資訊。
3000
| 數量 | 單價 | 每卷 |
|---|---|---|
| 3000 - 3000 | 21.588 MOP | 64,763.63 MOP |
| 6000+ | 20.94 MOP | 62,820.72 MOP |
醞釀。 創造。 合作
免費加入
無隱藏費用！
技術文件
規格
Brand
STMicroelectronicsOutput Current
200mA
Product Type
Lighting Controller
Input Voltage
42, 4.5V
Input Voltage Type
DC
Dimming Operation
Analogue
Mount Type
Surface
Package Type
QFN
Number of Pins
24
Maximum Output Voltage
42V
Minimum Operating Temperature
-40°C
Maximum Operating Temperature
150°C
Standards/Approvals
RoHS
Width
5.1mm
Series
ALED7709ATR
Length
5.1mm
Height
0.9mm
Automotive Standard
AEC-Q100
Minimum Output Voltage
4.5V
原產地
Thailand
產品詳情
The STMicroelectronics automotive grade LED drivers combining a boost or SEPIC controller and four low-side constant current sinkers, designed to drive strings of high brightness LEDs. The switching converter section provides the supply rail for the LED strings whose value is constantly optimized for maximum efficiency. The boost or SEPIC controller supports the external synchronization and spread spectrum. It can work simultaneously or exclusively in standalone mode (SAM), controlled only by PWMI signal and in bus driven mode (BDM) through an I2C serial interface.
醞釀。 創造。 合作
免費加入
無隱藏費用！
