STMicroelectronics L298N, Stepper Motor Driver IC, 46 V 4A 15-Pin, MULTIWATT V
技術文件
規格
Brand
STMicroelectronicsMotor Type
Stepper
Output Configuration
Dual Full Bridge
Maximum IGBT Collector Current
4A
Maximum Collector Emitter Voltage
46 V
Mounting Type
Through Hole
Package Type
MULTIWATT V
Pin Count
15
Maximum Operating Supply Voltage
46 V
Minimum Operating Supply Voltage
4.8 V
Minimum Operating Temperature
-25 °C
Height
10.7mm
Dimensions
19.6 x 5 x 10.7mm
Maximum Operating Temperature
+130 °C
Length
19.6mm
Width
5mm
產品詳情
L298 Dual Full Bridge Motor Driver
ST Microelectronics presents its L298 dual full bridge driver series. The L298 series from ST is an integrated high voltage, high current dual full bridge driver. These devices are specially designed to accept standard TTL logic and drive inductive loads in Relays, Solenoids, DC and Stepper Motors. Featured are two enable inputs that allow the L298 to be enabled or disabled independently of the input signals. The emitters of the lower transistors of each bridge are connected together, the corresponding external terminal can be used to connect an external sensing resistor. In addition, a supply input is provided so that the logic works at a lower voltage.
Motor Controllers & Drivers, STMicroelectronics
醞釀。 創造。 合作
免費加入
無隱藏費用！
- 下載並使用我們的 DesignSpark 軟體進行 PCB 和 3D 機械設計
- 查看網站內容和論壇
- 下載超過一百萬種產品的 3D 模型、原理圖和封裝
P.O.A.
Each (In a Tube of 25) (不含稅)
25
P.O.A.
Each (In a Tube of 25) (不含稅)
暫時無法取得庫存資訊。
25
暫時無法取得庫存資訊。
醞釀。 創造。 合作
免費加入
無隱藏費用！
- 下載並使用我們的 DesignSpark 軟體進行 PCB 和 3D 機械設計
- 查看網站內容和論壇
- 下載超過一百萬種產品的 3D 模型、原理圖和封裝
技術文件
規格
Brand
STMicroelectronicsMotor Type
Stepper
Output Configuration
Dual Full Bridge
Maximum IGBT Collector Current
4A
Maximum Collector Emitter Voltage
46 V
Mounting Type
Through Hole
Package Type
MULTIWATT V
Pin Count
15
Maximum Operating Supply Voltage
46 V
Minimum Operating Supply Voltage
4.8 V
Minimum Operating Temperature
-25 °C
Height
10.7mm
Dimensions
19.6 x 5 x 10.7mm
Maximum Operating Temperature
+130 °C
Length
19.6mm
Width
5mm
產品詳情
L298 Dual Full Bridge Motor Driver
ST Microelectronics presents its L298 dual full bridge driver series. The L298 series from ST is an integrated high voltage, high current dual full bridge driver. These devices are specially designed to accept standard TTL logic and drive inductive loads in Relays, Solenoids, DC and Stepper Motors. Featured are two enable inputs that allow the L298 to be enabled or disabled independently of the input signals. The emitters of the lower transistors of each bridge are connected together, the corresponding external terminal can be used to connect an external sensing resistor. In addition, a supply input is provided so that the logic works at a lower voltage.
Motor Controllers & Drivers, STMicroelectronics
醞釀。 創造。 合作
免費加入
無隱藏費用！
- 下載並使用我們的 DesignSpark 軟體進行 PCB 和 3D 機械設計
- 查看網站內容和論壇
- 下載超過一百萬種產品的 3D 模型、原理圖和封裝