技術文件
規格
Brand
STMicroelectronicsLogic Family
CMOS
Product Type
Line Transceiver
Logic Function
Buffer & Line Driver
Number of Channels
2
Input Type
CMOS
Output Type
3 State
Polarity
Inverting
Minimum Supply Voltage
5V
Pin Count
20
Maximum Supply Voltage
35V
Maximum Propagation Delay Time @ CL
10μs
Minimum Operating Temperature
-40°C
Maximum Operating Temperature
150°C
Standards/Approvals
No
Series
L6364
Length
2.57mm
Height
0.47mm
Automotive Standard
No
Supply Current
50mA
產品詳情
The STMicroelectronics dual channel transceiver for industrial sensor applications has been designed to support even the IO-Link standard and acts as a bridge between a microcontroller with a sensor or actuator function and a 24 V supply and signalling cable. In normal operation the L6364 is configured at start up by the microcontroller via the SPI interface. Typically, the L6364 then operates as a Single Input Output device driving the output lines as configured by the microcontroller. If the device is connected to an IO-Link Master, then the Master can initiate communication and exchange data with the microcontroller while the L6364 acts as a physical layer for the communication.
暫時無法取得庫存資訊。
43.10 MOP
43.07 MOP Each (不含稅)
標準
1
43.10 MOP
43.07 MOP Each (不含稅)
暫時無法取得庫存資訊。
標準
1
| 數量 | 單價 |
|---|---|
| 1 - 9 | 43.07 MOP |
| 10 - 99 | 41.32 MOP |
| 100 - 249 | 40.09 MOP |
| 250+ | 39.26 MOP |
技術文件
規格
Brand
STMicroelectronicsLogic Family
CMOS
Product Type
Line Transceiver
Logic Function
Buffer & Line Driver
Number of Channels
2
Input Type
CMOS
Output Type
3 State
Polarity
Inverting
Minimum Supply Voltage
5V
Pin Count
20
Maximum Supply Voltage
35V
Maximum Propagation Delay Time @ CL
10μs
Minimum Operating Temperature
-40°C
Maximum Operating Temperature
150°C
Standards/Approvals
No
Series
L6364
Length
2.57mm
Height
0.47mm
Automotive Standard
No
Supply Current
50mA
產品詳情
The STMicroelectronics dual channel transceiver for industrial sensor applications has been designed to support even the IO-Link standard and acts as a bridge between a microcontroller with a sensor or actuator function and a 24 V supply and signalling cable. In normal operation the L6364 is configured at start up by the microcontroller via the SPI interface. Typically, the L6364 then operates as a Single Input Output device driving the output lines as configured by the microcontroller. If the device is connected to an IO-Link Master, then the Master can initiate communication and exchange data with the microcontroller while the L6364 acts as a physical layer for the communication.
