技術文件
規格
Brand
STMicroelectronicsLogic Family
CMOS
Product Type
Line Transceiver
Logic Function
Buffer & Line Driver
Number of Channels
2
Input Type
CMOS
Output Type
3 State
Polarity
Inverting
Minimum Supply Voltage
5V
Pin Count
20
Maximum Supply Voltage
35V
Maximum Propagation Delay Time @ CL
10μs
Minimum Operating Temperature
-40°C
Maximum Operating Temperature
150°C
Height
0.47mm
Length
2.57mm
Standards/Approvals
No
Width
2.57mm
Series
L6364
Supply Current
50mA
Automotive Standard
No
產品詳情
The STMicroelectronics dual channel transceiver for industrial sensor applications has been designed to support even the IO-Link standard and acts as a bridge between a microcontroller with a sensor or actuator function and a 24 V supply and signalling cable. In normal operation the L6364 is configured at start up by the microcontroller via the SPI interface. Typically, the L6364 then operates as a Single Input Output device driving the output lines as configured by the microcontroller. If the device is connected to an IO-Link Master, then the Master can initiate communication and exchange data with the microcontroller while the L6364 acts as a physical layer for the communication.
暫時無法取得庫存資訊。
43.10 MOP
43.07 MOP Each (Supplied on a Reel) (不含稅)
生產包 (卷)
1
43.10 MOP
43.07 MOP Each (Supplied on a Reel) (不含稅)
暫時無法取得庫存資訊。
生產包 (卷)
1
| 數量 | 單價 |
|---|---|
| 1 - 9 | 43.07 MOP |
| 10 - 99 | 41.32 MOP |
| 100 - 249 | 40.09 MOP |
| 250+ | 39.26 MOP |
技術文件
規格
Brand
STMicroelectronicsLogic Family
CMOS
Product Type
Line Transceiver
Logic Function
Buffer & Line Driver
Number of Channels
2
Input Type
CMOS
Output Type
3 State
Polarity
Inverting
Minimum Supply Voltage
5V
Pin Count
20
Maximum Supply Voltage
35V
Maximum Propagation Delay Time @ CL
10μs
Minimum Operating Temperature
-40°C
Maximum Operating Temperature
150°C
Height
0.47mm
Length
2.57mm
Standards/Approvals
No
Width
2.57mm
Series
L6364
Supply Current
50mA
Automotive Standard
No
產品詳情
The STMicroelectronics dual channel transceiver for industrial sensor applications has been designed to support even the IO-Link standard and acts as a bridge between a microcontroller with a sensor or actuator function and a 24 V supply and signalling cable. In normal operation the L6364 is configured at start up by the microcontroller via the SPI interface. Typically, the L6364 then operates as a Single Input Output device driving the output lines as configured by the microcontroller. If the device is connected to an IO-Link Master, then the Master can initiate communication and exchange data with the microcontroller while the L6364 acts as a physical layer for the communication.
