STMicroelectronics Nucleo Pack MCU Development Kit P-NUCLEO-IOM01M1

Name: STMicroelectronics Nucleo Pack MCU Development Kit P-NUCLEO-IOM01M1
Brand: STMicroelectronics
SKU: 1827766

RS 庫存號: 182-7766品牌: STMicroelectronics製造商零件號: P-NUCLEO-IOM01M1

查看Microcontroller Development Tools中的所有內容

技術文件

規格

Brand

STMicroelectronics

Classification

Development Kit

Kit Name

Nucleo Pack

Technology

MCU

Device Core

ARM Cortex M4

Processor Family Name

ARM

Processor Part Number

STM32F446RET6

Processor Type

Microcontroller

原產地

Italy

產品詳情

STEVAL-IOM001V1
IO-Link master PHY based on L6360
Interrupt diagnostics pin
I²C and UART interface
SPI (slave) interface
65 mA selectable (3.3 or 5.0 V) linear regulator
CQ (push-pull) and L+ (high side) switches
IQ additional IEC61131-2 type 1 digital input
L+ and CQ overload and overheating protections with non-dissipative cut-off function
QFN-26L (3.5x5x1 mm) package
Operating voltage range from 18 to 32.5 V
Additional high side switch for L+ heavy loads
LEDs for status and diagnostics
Ground and VCC wire break protections
Equipped with ST morpho connectors
32-bit Micro-controller based on ARM®Cortex®-M4 core (180 MHz max.) with 512-Kbyte Flash memory and 128 (+4) Kbyte RAM
Two types of extension resources: Arduino™ UNO Revision 3 connectivity and ST morpho extension pin headers for full access to all STM32 I/Os
Mbed-enabled
On-board ST-LINK/V2-1 debugger/programmer with SWD connector: selection-mode switch to use the kit as a standalone ST-LINK/V2-1
Two push-buttons: USER and RESET

查看Microcontroller Development Tools中的所有內容

暫時無法取得庫存資訊。

P.O.A.

STMicroelectronics Nucleo Pack MCU Development Kit P-NUCLEO-IOM01M1

P.O.A.

STMicroelectronics Nucleo Pack MCU Development Kit P-NUCLEO-IOM01M1

暫時無法取得庫存資訊。

技術文件

規格

Brand

STMicroelectronics

Classification

Development Kit

Kit Name

Nucleo Pack

Technology

MCU

Device Core

ARM Cortex M4

Processor Family Name

ARM

Processor Part Number

STM32F446RET6

Processor Type

Microcontroller

原產地

Italy

產品詳情

STEVAL-IOM001V1
IO-Link master PHY based on L6360
Interrupt diagnostics pin
I²C and UART interface
SPI (slave) interface
65 mA selectable (3.3 or 5.0 V) linear regulator
CQ (push-pull) and L+ (high side) switches
IQ additional IEC61131-2 type 1 digital input
L+ and CQ overload and overheating protections with non-dissipative cut-off function
QFN-26L (3.5x5x1 mm) package
Operating voltage range from 18 to 32.5 V
Additional high side switch for L+ heavy loads
LEDs for status and diagnostics
Ground and VCC wire break protections
Equipped with ST morpho connectors
32-bit Micro-controller based on ARM®Cortex®-M4 core (180 MHz max.) with 512-Kbyte Flash memory and 128 (+4) Kbyte RAM
Two types of extension resources: Arduino™ UNO Revision 3 connectivity and ST morpho extension pin headers for full access to all STM32 I/Os
Mbed-enabled
On-board ST-LINK/V2-1 debugger/programmer with SWD connector: selection-mode switch to use the kit as a standalone ST-LINK/V2-1
Two push-buttons: USER and RESET