技術文件
規格
Brand
STMicroelectronicsProduct Type
Power Management Development Kit
Power Management Function
Power Management
For Use With
Non-Isolated SMPS
Kit Classification
Evaluation Board
Featured Device
VIPER16LD
Kit Name
Demonstration Board
Standards/Approvals
RoHS
原產地
Italy
產品詳情
The STEVAL-ISA119V1 is a dual output buck demonstration board using the VIPER16LD, a new off-line high voltage converter by STMicroelectronics which has been specifically developed for non-isolated SMPS. Output regulation is easily achieved through a voltage divider to the output voltage.
The VIPER16LD can work with or without an external supply. In the former case, very low standby consumption is possible(< 50 mW at 265 Vac) while in the latter case, the cost and complication of the IC supply network may be reduced.
The other features of the device include an 800 V avalanche-rugged power section, PWM operation at 60 kHz with frequency jittering for lower EMI, limiting current with adjustable set point, on-board soft-start and safe auto-restart after a fault condition.
The available protection features are thermal shutdown with hysteresis and delayed overload protection.
暫時無法取得庫存資訊。
590.30 MOP
590.27 MOP Each (不含稅)
1
590.30 MOP
590.27 MOP Each (不含稅)
暫時無法取得庫存資訊。
1
| 數量 | 單價 |
|---|---|
| 1 - 4 | 590.27 MOP |
| 5+ | 578.42 MOP |
技術文件
規格
Brand
STMicroelectronicsProduct Type
Power Management Development Kit
Power Management Function
Power Management
For Use With
Non-Isolated SMPS
Kit Classification
Evaluation Board
Featured Device
VIPER16LD
Kit Name
Demonstration Board
Standards/Approvals
RoHS
原產地
Italy
產品詳情
The STEVAL-ISA119V1 is a dual output buck demonstration board using the VIPER16LD, a new off-line high voltage converter by STMicroelectronics which has been specifically developed for non-isolated SMPS. Output regulation is easily achieved through a voltage divider to the output voltage.
The VIPER16LD can work with or without an external supply. In the former case, very low standby consumption is possible(< 50 mW at 265 Vac) while in the latter case, the cost and complication of the IC supply network may be reduced.
The other features of the device include an 800 V avalanche-rugged power section, PWM operation at 60 kHz with frequency jittering for lower EMI, limiting current with adjustable set point, on-board soft-start and safe auto-restart after a fault condition.
The available protection features are thermal shutdown with hysteresis and delayed overload protection.
