技術文件
規格
Brand
STMicroelectronicsKit Name
Analogue Microphone Array Expansion
產品詳情
The STEVAL-STWINMAV1 microphone array expansion adds advanced audio sensing capabilities to the STEVAL-STWINKT1B (and STEVAL-STWINKT1) SensorTile Wireless Industrial Node (STWIN) kit for high frequency vibration monitoring applications.
The board includes four low-power, high signal-to-noise ratio (SNR) MP23ABS1 capacitive sensing microphones, supported by a very low drop voltage, low quiescent current and low-noise voltage regulator ideal for batter-powered applications such as STWIN.
The expansion board is connected via a dedicated 12-pin connector to the core system board, which runs the STSW-STWINKT01 firmware with dedicated BSP drivers and application examples for you to test and develop vibration monitoring in the ultrasound frequency ranges.
•Analog microphone array expansion for STEVAL-STWINKT1B (and STEVAL-STWINKT1)
•Connects to STWIN core system board through dedicated 12-pin connector
•3 V to 5.5 V power supply input
•4 mm square-shaped differential microphone array
•4x MP23ABS1 high-performance, single-ended, analog, bottom-port MEMS microphones
•LDK130 300 mA low quiescent current very low noise LDO
•On-board audio-grade quad ADC
•Serial Audio Interface (SAI) digital output
暫時無法取得庫存資訊。
211.80 MOP
211.77 MOP Each (不含稅)
1
211.80 MOP
211.77 MOP Each (不含稅)
暫時無法取得庫存資訊。
1
| 數量 | 單價 |
|---|---|
| 1 - 4 | 211.77 MOP |
| 5+ | 207.54 MOP |
技術文件
規格
Brand
STMicroelectronicsKit Name
Analogue Microphone Array Expansion
產品詳情
The STEVAL-STWINMAV1 microphone array expansion adds advanced audio sensing capabilities to the STEVAL-STWINKT1B (and STEVAL-STWINKT1) SensorTile Wireless Industrial Node (STWIN) kit for high frequency vibration monitoring applications.
The board includes four low-power, high signal-to-noise ratio (SNR) MP23ABS1 capacitive sensing microphones, supported by a very low drop voltage, low quiescent current and low-noise voltage regulator ideal for batter-powered applications such as STWIN.
The expansion board is connected via a dedicated 12-pin connector to the core system board, which runs the STSW-STWINKT01 firmware with dedicated BSP drivers and application examples for you to test and develop vibration monitoring in the ultrasound frequency ranges.
•Analog microphone array expansion for STEVAL-STWINKT1B (and STEVAL-STWINKT1)
•Connects to STWIN core system board through dedicated 12-pin connector
•3 V to 5.5 V power supply input
•4 mm square-shaped differential microphone array
•4x MP23ABS1 high-performance, single-ended, analog, bottom-port MEMS microphones
•LDK130 300 mA low quiescent current very low noise LDO
•On-board audio-grade quad ADC
•Serial Audio Interface (SAI) digital output
