STMicroelectronics MCP9701T Series, Digital Output Temperature & Humidity Sensor, Surface Mount, SMBus, ±2.5 %, 6-Pin

Name: STMicroelectronics MCP9701T Series, Digital Output Temperature & Humidity Sensor, Surface Mount, SMBus, ±2.5 %, 6-Pin
Brand: STMicroelectronics
SKU: 1908454
Availability: LimitedAvailability

RS 庫存號: 190-8454品牌: STMicroelectronics製造商零件號: STTS751-1DP3F

查看Temperature & Humidity Sensor ICs中的所有內容

技術文件

規格

Brand

STMicroelectronics

Product Type

Temperature & Humidity Sensor

Output Type

Digital

Sub Type

Temperature Sensor

Interface Type

SMBus

Accuracy

±2.5 %

Mount Type

Surface

Pin Count

Maximum Operating Temperature

125°C

Minimum Operating Temperature

-40°C

Minimum Supply Voltage

2.25V

Maximum Supply Voltage

3.6V

Package Type

UDFN

Length

2.05mm

Height

0.5mm

Standards/Approvals

Series

MCP9701T

Automotive Standard

產品詳情

The STTS751 is a digital temperature sensor which communicates over a 2-wire SMBus 2.0 compatible bus. The temperature is measured with a user-configurable resolution between 9 and 12 bits. At 9 bits, the smallest step size is 0.5 °C, and at 12 bits, it is 0.0625 °C. At the default resolution (10 bits, 0.25 °C/LSB), the conversion time is nominally 21 milliseconds.
The open-drain EVENT output is used to indicate an alarm condition in which the measured temperature has exceeded the user-programmed high limit or fallen below the low limit. When the EVENT pin is asserted, the host can respond using the SMBus Alert Response Address (ARA) protocol to which the STTS751 will respond by sending its slave address.
The STTS751 is a 6-pin device that supports user-configurable slave addresses. Via the pull-up resistor on the Addr/Therm pin, one of four different slave addresses can be specified. Two order numbers (STTS751-0 and STTS751-1) provide two different sets of slave addresses bringing the total available to eight. Thus, up to eight devices can share the same 2-wire SMBus without ambiguity, thereby allowing monitoring of multiple temperature zones in an application.
The two-wire interface can support transfer rates up to 400 kHz.

醞釀。創造。合作

免費加入

無隱藏費用！

下載並使用我們的 DesignSpark 軟體進行 PCB 和 3D 機械設計
查看網站內容和論壇
下載超過一百萬種產品的 3D 模型、原理圖和封裝

暫時無法取得庫存資訊。

19,293.80 MOP

6.431 MOP Each (On a Reel of 3000) (不含稅)

STMicroelectronics MCP9701T Series, Digital Output Temperature & Humidity Sensor, Surface Mount, SMBus, ±2.5 %, 6-Pin

19,293.80 MOP

6.431 MOP Each (On a Reel of 3000) (不含稅)

STMicroelectronics MCP9701T Series, Digital Output Temperature & Humidity Sensor, Surface Mount, SMBus, ±2.5 %, 6-Pin

暫時無法取得庫存資訊。

數量	單價	每卷
3000 - 3000	6.431 MOP	19,293.84 MOP
6000 - 9000	6.238 MOP	18,715.01 MOP
12000+	6.051 MOP	18,153.70 MOP

醞釀。創造。合作

免費加入

無隱藏費用！

下載並使用我們的 DesignSpark 軟體進行 PCB 和 3D 機械設計
查看網站內容和論壇
下載超過一百萬種產品的 3D 模型、原理圖和封裝

請點擊這裡了解更多

技術文件

規格

Brand

STMicroelectronics

Product Type

Temperature & Humidity Sensor

Output Type

Digital

Sub Type

Temperature Sensor

Interface Type

SMBus

Accuracy

±2.5 %

Mount Type

Surface

Pin Count

Maximum Operating Temperature

125°C

Minimum Operating Temperature

-40°C

Minimum Supply Voltage

2.25V

Maximum Supply Voltage

3.6V

Package Type

UDFN

Length

2.05mm

Height

0.5mm

Standards/Approvals

Series

MCP9701T

Automotive Standard

產品詳情

The STTS751 is a digital temperature sensor which communicates over a 2-wire SMBus 2.0 compatible bus. The temperature is measured with a user-configurable resolution between 9 and 12 bits. At 9 bits, the smallest step size is 0.5 °C, and at 12 bits, it is 0.0625 °C. At the default resolution (10 bits, 0.25 °C/LSB), the conversion time is nominally 21 milliseconds.
The open-drain EVENT output is used to indicate an alarm condition in which the measured temperature has exceeded the user-programmed high limit or fallen below the low limit. When the EVENT pin is asserted, the host can respond using the SMBus Alert Response Address (ARA) protocol to which the STTS751 will respond by sending its slave address.
The STTS751 is a 6-pin device that supports user-configurable slave addresses. Via the pull-up resistor on the Addr/Therm pin, one of four different slave addresses can be specified. Two order numbers (STTS751-0 and STTS751-1) provide two different sets of slave addresses bringing the total available to eight. Thus, up to eight devices can share the same 2-wire SMBus without ambiguity, thereby allowing monitoring of multiple temperature zones in an application.
The two-wire interface can support transfer rates up to 400 kHz.

醞釀。創造。合作

免費加入

無隱藏費用！

下載並使用我們的 DesignSpark 軟體進行 PCB 和 3D 機械設計
查看網站內容和論壇
下載超過一百萬種產品的 3D 模型、原理圖和封裝

請點擊這裡了解更多

數量

單價

每卷

3000 - 3000

6.431 MOP

19,293.84 MOP

6000 - 9000

6.238 MOP

18,715.01 MOP

12000+

6.051 MOP

18,153.70 MOP