技術文件
規格
Brand
TE ConnectivityProduct Type
Heat Shrink Boot
Sub Type
End Cap
Material
Polyolefin
Number of Breakouts
1
Shrink Temperature
125°C
Colour
Black
Minimum Operating Temperature
-55°C
Maximum Operating Temperature
110°C
Minimum Inside Diameter
2mm
Maximum Inside Diameter
12.7mm
Maximum Shrunk Diameter
2.29mm
Standards/Approvals
UL E85381
Adhesive Backing
No
Series
PD Caps
原產地
Czech Republic
產品詳情
Semirigid, encapsulant-lined heat shrink end caps with a shrink ratio of 3:1. When the dual wall PD Caps are briefly heated, the outer jacket shrinks while the inner wall flows into voids in the crimp, creating an encapsulated and electrically insulated connection.
PD Caps are not intended for use where immersion in fluids is required.
暫時無法取得庫存資訊。
369.00 MOP
3.69 MOP Each (In a Pack of 100) (不含稅)
100
369.00 MOP
3.69 MOP Each (In a Pack of 100) (不含稅)
暫時無法取得庫存資訊。
100
| 數量 | 單價 | 每包 |
|---|---|---|
| 100 - 1400 | 3.69 MOP | 369.02 MOP |
| 1500 - 4900 | 3.58 MOP | 358.00 MOP |
| 5000+ | 3.473 MOP | 347.28 MOP |
技術文件
規格
Brand
TE ConnectivityProduct Type
Heat Shrink Boot
Sub Type
End Cap
Material
Polyolefin
Number of Breakouts
1
Shrink Temperature
125°C
Colour
Black
Minimum Operating Temperature
-55°C
Maximum Operating Temperature
110°C
Minimum Inside Diameter
2mm
Maximum Inside Diameter
12.7mm
Maximum Shrunk Diameter
2.29mm
Standards/Approvals
UL E85381
Adhesive Backing
No
Series
PD Caps
原產地
Czech Republic
產品詳情
Semirigid, encapsulant-lined heat shrink end caps with a shrink ratio of 3:1. When the dual wall PD Caps are briefly heated, the outer jacket shrinks while the inner wall flows into voids in the crimp, creating an encapsulated and electrically insulated connection.
PD Caps are not intended for use where immersion in fluids is required.
