技術文件
規格
Brand
Texas InstrumentsMaximum Data Rate
480Mbps
Number of Transceivers
2
Product Type
Controller IC
Sub Type
Controller
USB Specification
USB 2.0
Power Supply Type
Dual
ESD Protection
Yes
Minimum Supply Voltage
0.99V
Maximum Supply Voltage
3.6V
Mount Type
Surface
Package Type
HTQFP
Pin Count
48
Dual Supply Voltage
3.3V
Minimum Operating Temperature
-40°C
Supported Protocols
USB 2.0
Maximum Operating Temperature
85°C
Height
1.05mm
Length
7.2mm
Standards/Approvals
No
Series
TUSB4020BI
Supply Current
39mA
Automotive Standard
No
產品詳情
Texas Instruments USB hub Controller devices provide multiple downstream ports in compliance with the USB 2.0 specification. As they are implemented as digital state machines rather than microcontrollers, no software programming is required. Fully-compliant USB transceivers are integrated into the ASIC for all upstream and downstream ports. Both full-speed and low-speed downstream ports are supported by automatically setting the slew rate according to the speed of the device attached to the ports.
暫時無法取得庫存資訊。
P.O.A.
Each (In a Pack of 2) (不含稅)
標準
2
P.O.A.
Each (In a Pack of 2) (不含稅)
暫時無法取得庫存資訊。
標準
2
技術文件
規格
Brand
Texas InstrumentsMaximum Data Rate
480Mbps
Number of Transceivers
2
Product Type
Controller IC
Sub Type
Controller
USB Specification
USB 2.0
Power Supply Type
Dual
ESD Protection
Yes
Minimum Supply Voltage
0.99V
Maximum Supply Voltage
3.6V
Mount Type
Surface
Package Type
HTQFP
Pin Count
48
Dual Supply Voltage
3.3V
Minimum Operating Temperature
-40°C
Supported Protocols
USB 2.0
Maximum Operating Temperature
85°C
Height
1.05mm
Length
7.2mm
Standards/Approvals
No
Series
TUSB4020BI
Supply Current
39mA
Automotive Standard
No
產品詳情
Texas Instruments USB hub Controller devices provide multiple downstream ports in compliance with the USB 2.0 specification. As they are implemented as digital state machines rather than microcontrollers, no software programming is required. Fully-compliant USB transceivers are integrated into the ASIC for all upstream and downstream ports. Both full-speed and low-speed downstream ports are supported by automatically setting the slew rate according to the speed of the device attached to the ports.