技術文件
規格
Brand
TranscendMemory Size
512GB
Product Type
SSD
Sub Type
SSD
Internal/External
Internal
Form Factor
M.2
Industrial Grade
Yes
NAND Type
3D
Encryption Level
256 Bit AES Encryption
Interface Type
NVMe PCIe Gen 4 x4
Minimum Operating Temperature
-20°C
Maximum Operating Temperature
75°C
Height
3.58mm
Length
80mm
Standards/Approvals
UKCA
Width
22mm
原產地
Taiwan, Province Of China
產品詳情
This SSD is an internal high-performance storage device designed for demanding industrial and workstation environments. It connects via an NVMe PCIe Gen4 x4 Interface to deliver Rapid data transfer and low-latency access. Built for use in automation, electronics and mechanical systems, it supports operation across a wide temperature range and includes hardware-level data protection.
It uses an M.2 form factor with an 80mm length and 22mm width, compatible with M.2 2280 slots that accept low-profile drives.
The drive is specified to operate up to 75°C, allowing deployment in enclosures or cabinets where higher thermal conditions occur.
It is designed as an internal storage solution for installation inside workstations and industrial equipment.
The device employs 3D NAND, which increases storage density and endurance compared with Planar NAND, beneficial for sustained write workloads.
It carries the UKCA approval, indicating conformity with applicable United Kingdom regulations.
暫時無法取得庫存資訊。
8,278.00 MOP
8,278.01 MOP Each (不含稅)
1
8,278.00 MOP
8,278.01 MOP Each (不含稅)
暫時無法取得庫存資訊。
1
技術文件
規格
Brand
TranscendMemory Size
512GB
Product Type
SSD
Sub Type
SSD
Internal/External
Internal
Form Factor
M.2
Industrial Grade
Yes
NAND Type
3D
Encryption Level
256 Bit AES Encryption
Interface Type
NVMe PCIe Gen 4 x4
Minimum Operating Temperature
-20°C
Maximum Operating Temperature
75°C
Height
3.58mm
Length
80mm
Standards/Approvals
UKCA
Width
22mm
原產地
Taiwan, Province Of China
產品詳情
This SSD is an internal high-performance storage device designed for demanding industrial and workstation environments. It connects via an NVMe PCIe Gen4 x4 Interface to deliver Rapid data transfer and low-latency access. Built for use in automation, electronics and mechanical systems, it supports operation across a wide temperature range and includes hardware-level data protection.
It uses an M.2 form factor with an 80mm length and 22mm width, compatible with M.2 2280 slots that accept low-profile drives.
The drive is specified to operate up to 75°C, allowing deployment in enclosures or cabinets where higher thermal conditions occur.
It is designed as an internal storage solution for installation inside workstations and industrial equipment.
The device employs 3D NAND, which increases storage density and endurance compared with Planar NAND, beneficial for sustained write workloads.
It carries the UKCA approval, indicating conformity with applicable United Kingdom regulations.
